Gypsum Board Production Line

Short Description:

The main material for producing such gypsum boards is mainly gypsum powder (calcined gypsum powder) that the content of CaSO4·1/2H2O is over 75%. The gypsum powder, water and various additives are automatically and separately measured and conveyed into the mixer by continuous auto-conveying system.


Product Detail

Product Tags

Introduction of Gypsum Board Production Line
The main material for producing such gypsum boards is mainly gypsum powder (calcined gypsum powder) that the content of CaSO4·1/2H2O is over 75%. The gypsum powder, water and various additives are automatically and separately measured and conveyed into the mixer by continuous auto-conveying system. After well mixed into slurry and spreaded onto the gypsum board protective paper which is continuously moving forward. During the progressing process, the slurry is gradually dispersed with vibration, and jointed with back protective paper. When going through extruded shaping machine, the slurry is fully wrapped by upper and lower paper, pressing into well-regulated flat board which is continuously brought forward at a stable and strictly controlled speed. After 4 minutes around, the calcined gypsum in the slurry is hydrated again and crystallized into tiny interpenetrative dihydrate gypsum crystal with higher strength. And then, the wet gypsum board with a certain strength and regular shape is precisely cut into individual boards with set size by an auto-controlled cutting system. The individual boards are orderly arranged, turned over by program control system and brought into the dyer. In the dryer, the absorbed water in the boards is evaporated away. Following strict drying system(The crystal water in the gypsum crystal has no loss). After brought out from the dryer, the boards are gradually cooled down in the running process. The front sides of every two boards are folded after turned over again, and the two ends are cut into boards with regular size and nice appearance by end sawing machine, the cut strips are crushed into pieces and taken by bag filter to discharge out. At the same time, the two ends of boards are packed by paper strips with fixed label. Finally the boards are conveyed to automatic stacking machine and stacked into well-ordered finished products before put into storage.

1. Annual output:
8 million to 20 million sqm(based on thickness of 9.5mm gypsum board)
2. Working time: 24hours/day and 300 days/year
3. Raw material: Gypsum powder, protective paper, modified starch, foaming agent, glue
4. Fuel: coal, natural gas, heavy oil, diesel
5. Product quality and specification:
1) The product is in compliance with National Standard GB/T9775-2008 or equivalent international standard
2) Product specification:
Length: 2400mm~3600mm
Width: 1200mm or 1220mm
Thickness: 8mm-20mm


  • Previous:
  • Next:

  • Write your message here and send it to us