Gypsum Stucco Making Line

Short Description:

After gypsum rock is fed into crusher system to get size of 3- 4cm rocks, which is lifted to silo before kiln, then after measured, the rocks are fed into rotary kiln for calcination. The heating medium is hot flume, whose pipeline scatters in the center and wall of kiln, while kiln is rotating, the gypsum rock can be heated evenly to get calcined. Calcned rocks are fed into silos for aging then conveyed to grinder mill to become powder. Then gypsum powder is conveyed to product silo to pack into different bags by packing machine.


Product Detail

Product Tags

After gypsum rock is fed into crusher system to get size of 3- 4cm rocks, which is lifted to silo before kiln, then after measured, the rocks are fed into rotary kiln for calcination. The heating medium is hot flume, whose pipeline scatters in the center and wall of kiln, while kiln is rotating, the gypsum rock can be heated evenly to get calcined. Calcned rocks are fed into silos for aging then conveyed to grinder mill to become powder. Then gypsum powder is conveyed to product silo to pack into different bags by packing machine.

 

1. Gypsum powder quality standard: in compliance with GB/T 9776-2008

2. Main Technology

Gypsum rock - first crushing -second crushing - calcining - aging - grinding-finished products (gypsum stucco/powder)-packing

3. Scope of application:

Gelled material made by dehydrating natural gypsum(raw material). Its main component is β-GaSO4·1/2H2O, without any admixture or additive.

The natural gypsum should be in conformity with requirements of "gypsum rock(JC/T700) for making cementing material" gypsum rock of Grade 3 or more higher grades.

  1. Technical Parameter:
Controlling Part Full Automatic
Annual capacity Customized (30, 000-200, 000 Tons Per Year)
Calcining system Rotary Kiln
Fuel Natural gas, diesel, coal, heavy oil
Raw material Natural Gypsum Rock (Content of CaSO4.2H2O >80%.)
Finished powder usage Gypsum board
Plaster powder/putty
Quality The Initial Setting Time: Shall Not Be 3-10 Minutes,
The Final Setting Time: Shall Not Be More 30 MinutesBending strength(after 2hr) ≥2.5N/mm2

Water Stucco Ratio: 68-75%

 

  1. Quality warranty

We guarantee that the supplied goods are new, unused, of the latest or recent models with all recent improvements in design and materials.

Warranty period: the guarantee period shall be maximum 12(twelve) months from the date on which the certificate of acceptance is signed by the Buyer or not more than 18(Eighteen) months from the date of Departure at loading port, whichever comes earlier.


  • Previous:
  • Next:

  • Write your message here and send it to us